Machine tap for through hole G 1/4" (HSS-E)

GEW MG G14 HSSE

Exemplary representation: Machine tap (inch)
pcs
{{ $t('shop.display.artikel.hinweis_alternative') }}
{{ $t('shop.display.artikel.beschreibung_headline') }}
Description:
Machine taps for G-threads according to DIN ISO 228 and Rp-threads according to DIN 2999. Flanks undercut, tolerances in accordance with ISO 2 / 6H. Screw tap version with overflow shank.

Quality:


HSS-G Co 5 (HSS-E):
Use for steel, cast steel alloys and non-alloys (<1,000 N/mm² tensile strength), grey-, malleable, ductile, cast and sintered iron, nickel silver, graphite and short cutting aluminium alloys, brass and bronze.
{{ $t('shop.display.artikel.eigenschaften_headline') }}
Version Machine tap for through hole
Thread G 1/4"
Core hole diameter [mm] 11,80
Square (DIN 10) [mm] 9,0
Total length [mm] 100
Thread length [mm] 22
Shaft diameter [mm] 11
First cut Shape B, 4 - 5 gears with spiral face inclination
GEWMGG14HSSE
{{ $t('shop.all.gewicht') }} 75 g / pcs
{{ $t('shop.display.artikel.zollwarennummer') }} 82074010
{{ $t('shop.all.dokumente') }}

 
{{ $t('shop.all.unverbindliche_richtwerte') }}

Accessories

{{ $t('shop.all.spaetbestellservice') }}
{{ countdownAsString }} {{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.spaetbestellservice.hinweis') }}

{{ $t('shop.all.wochenendversand') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.wochenendversand.hinweis') }}

An error has occurred!

An error has occurred, please reload this page and try again.