3/2-way solenoid valve G 1/4" brez elektricnega toka odprto (NO)

Št. Izdelka:

MO 314 230V **

Kos
Opis artikla
Materials:
Body: brass (DN 25 & DN 40: red bronze), internal parts: brass / stainless steel, seal: NBR (types G 1/8" & G 1/4": FKM)

Temperature range:
0°C to max. +80°C (G 1/8" & G 1/4": -10°C to max. +130°C), environment maks. +50 °C

Media:
Compressed air, neutral gases, water, neutral low-viscosity media, heating oil, other media on request

Installation position:
any (G 1/8" & G 1/4": upright magnet)

Control voltages:
Standard: 24 V DC, 230 V AC, upon request other voltages

Voltage tolerance:
± 10 %

Protection class:
IP 65 (plug size 3)

Information:
These valves are always supplied with a solenoid coil and a connector plug.

Warning:
For opening or closing, servo-controlled valves require a pressure difference between the valve inlet and valve outlet. The pressure difference is given as minimum pressure. There is a pressure compensation in the valve, resulting that no or little medium is used at the valve outlet, the valve will no longer function (it opens or closes unreliably).
Lastnosti
Krmilna napetost 230 V AC
Funkcija brez električnega toka odprto (NO)
Navoj (2x) G 1/4"
Navoj odpadni zrak G 1/8" (AG)
Obratovalni tlak 0 - 7
DN 2,5
L 40
Kv-vrednost* 3,4
Poraba energije (AC) 18
Izvedba magnetna tuljava GH
Nadomestna magnetna tuljava MAG GH 230V
Temperaturno območje od -10 do +130
Dodatne informacije o MO314230V
Teža 370 g / Kos
Številka carinskega blaga 84812090
Skladno z RoHS Da
Dokumenti
*Water flow rate at +20°C, 1 bar pressure at the valve inlet, free discharge, **Warning: Pressure input at connection 2, venting over connection 3

 
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Takoj dobavljivo