3/2-way solenoid valve G 1/8" brez elektricnega toka zaprto (NC)

Št. Izdelka:

M 318 230V **

Kos
Opis artikla
Materials:
Body: brass (DN 25 & DN 40: red bronze), internal parts: brass / stainless steel, seal: NBR (types G 1/8" & G 1/4": FKM)

Temperature range:
0°C to max. +80°C (G 1/8" & G 1/4": -10°C to max. +130°C), environment maks. +50 °C

Media:
Compressed air, neutral gases, water, neutral low-viscosity media, heating oil, other media on request

Installation position:
any (G 1/8" & G 1/4": upright magnet)

Control voltages:
Standard: 24 V DC, 230 V AC, upon request other voltages

Voltage tolerance:
± 10 %

Protection class:
IP 65 (plug size 3)

Information:
These valves are always supplied with a solenoid coil and a connector plug.

Warning:
For opening or closing, servo-controlled valves require a pressure difference between the valve inlet and valve outlet. The pressure difference is given as minimum pressure. There is a pressure compensation in the valve, resulting that no or little medium is used at the valve outlet, the valve will no longer function (it opens or closes unreliably).
Lastnosti
Kr­mil­na na­pe­tost 230 V AC
Funk­ci­ja brez ele­k­trič­ne­ga toka za­pr­to (NC)
Navoj (2x) G 1/8"
Navoj od­pa­dni zrak G 1/8" (AG)
Obra­to­val­ni tlak 0 - 7
DN 2,5
L 40
Kv-​vrednost* 3,4
Po­ra­ba ener­gi­je (AC) 18
Iz­ved­ba ma­gne­tna tu­lja­va G
Na­do­me­stna ma­gne­tna tu­lja­va MAG G 230V
Tem­pe­ra­tur­no ob­mo­čje od -10 do +130
Dodatne informacije o M318230V
Teža 360 g / Kos
Številka carinskega blaga 84812090
Skladno z RoHS Da
Dokumenti
*Water flow rate at +20°C, 1 bar pressure at the valve inlet, free discharge, **Warning: Pressure input at connection 2, venting over connection 3

 
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Takoj dobavljivo