Kos
Opis artikla
Suitable:
These solenoid-operated way valves are used in hydraulic systems predominantly for starting, stopping and changing the direction of flow of the liquid. Using NG 6 the pressure valve, the flow control valve and the check valve sandwich plates are arranged like a stack to form a circuit in the smallest space possible.

Materials:
Body: Spheroidal cast iron, internal parts: Steel, seals: NBR

Temperature range:
-30 do +80 °C

Media:
Hydraulic oils on the basis of mineral oil (viscosity: Bosch Rexroth: 2,8 - 500 mm²/s, alternatively: 20 - 400 mm²/s)

Control voltages:
Standard: 24 V DC, 230 V AC, upon request other voltages

Voltage tolerance:
± 10 %

Protection class:
IP 65

Operating pressure:
0 do 350 bar

Nominal flow:
Up to approx. 80 l/min (request pressure loss curves if required), we recommend usage up to approx. 40 l/min

Note:
The connection pattern NG 6 is standardised in accordance with DIN 24340-A6, ISO 4401-03, CETOP R 35 H-03 and NFPA-D03. The valves must be attached with screws of strength class 12.9.

Scope of delivery:
Valve including seals, without screws and plugs.

Warning:
Please do not forget to order screws and valve plugs.
Lastnosti
Iz­ved­ba Al­ter­na­tiv­no
Funk­ci­ja 4/3-​potni ven­til
Sim­bol pre­klo­pa J
Kr­mil­na na­pe­tost 230 V AC
Po­ra­ba ener­gi­je (AC) 35
Pri­mer­ni stan­dar­dni ko­nek­tor­ji ST 03
Ustre­zni vi­ja­ki (4 kosi za vsak ven­til) 912-​M5X45 ST 12.9
Na­do­me­stna ma­gne­tna tu­lja­va LA-​4WE6MAG230V
A 215,0
C 85,0
Dol­ži­na vi­ja­ka 45
Dodatne informacije o LA-4WE6J/W230
Teža 2 kg / Kos
Številka carinskega blaga 84812010
Dokumenti
*our recommendation for use

 
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Takoj dobavljivo