Compensator, DN32, R 1-1/4" (AG)-R 1-1/4" (AG), NBR

Št. Izdelka:

KOM 32 AG-B

Kos
Opis artikla
Version:
elastic, form-pressed bellows, reinforcement carrier made of synthetic fibres, connections screwed on both the sides

Equalising capacity:
axial (compression/extension), lateral (lateral offset), angular (angular deviation)

Materials:
Bellows: EPDM (hot water, acid and alkalis resistant), thread connections: Malleable cast iron, galvanised zinc plated, flat seal: Aramide NBR

Temperature range:
maks. +110 °C (depending on operating pressure)

Operating pressure:
-1 do 16 bar (from +60°C: 10 bar, from +100°C: 6 bar), burst pressure: 50 bar (For intermittent loading, the max. operating pressure should be set approx. 30% lower)

Warning:
When installing the compensator, it is urged to follow the assembly instructions in all cases!

Optional:
Bellows from NBR, oil resistant -B
Lastnosti
G1 R 1-1/4" (AG)
G2 R 1-1/4" (AG)
Izvedba meh NBR
Izvedba Zunanji navoj
DN 32
Aksialno krčenje 30
Aksialno raztezanje 10
Lateralni odmik 15
Odstopanje kota 25
L 237
SW1 75
SW2 47
Dodatne informacije o KOM32AG-B
Teža 2,7 kg / Kos
Številka carinskega blaga 40169991
Skladno z RoHS Da
Dokumenti

 
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Takoj dobavljivo