Electric PVC ball valve, 110mm, Nastavki za lepljenje, EPDM-seal

Advantages:
•2 additional limit switches,
•torque cut-off,
•variable voltage (DC or AC),
•manual emergency operation,
•integrated heating in actuator housing

Ball valve


Materials:
Body: PVC-U, bridge: PP, seals: EPDM or FKM, ball seat: PTFE

Temperature range:
0 do +60 °C

Operating range:
Industry, water treatment or water supply

Rotary actuator


Description:
Electrical rotary actuator with optical position indicator, manual emergency operation and switch room heating Two additional limit switches are installed for further control requirements. An electronic torque monitoring unit prevents damage in the event of overload. The manual emergency operation can be done without dismantling the external cladding. Do not use upside down!

Materials:
Body: PA 6

Temperature range:
-20 do +70 °C

Voltage:
24 - 240 V AC/DC, (drives can be operated with direct or alternating voltage)

Protection class:
IP 67

Power-on time:
75%

Optional:
Regulating time 140 sec. (only for drive size 2 & 3) -140, "Battery Safety Return" for emergency closing NC (default configuration) or emergency opening NO (conversion with a jumper) when there is a power failure -BSR, Positioning system 0 - 10 V or 4 - 20 mA (conversion with a jumper), precision: 3%, linearity: 2%, hysteresis: 3%, switch position NC or NO (conversion with a jumper) -DPS

Warning:
Not suitable for compressed air or other gases under pressure!

Napetost	24 do 240 V (AC/DC)
Tesnila	EPDM
Izvedba	Nastavki za lepljenje
Lepilna objemka Notranji premer Krogelna pipa	110
Ausführung (Elektrischer Antrieb)	Sistem za pozicioniranje 0–10 V/4–20mA
DN	100
Vgradna dolžina krogelna pipa	284
PN	0 - 16
Pretok*	10000
Nastavljalni čas	13
Nadomestni pogoni	ELU 230-4-DPS

{{ $t('shop.display.artikel.zollwarennummer') }}

84818081