Kos
Opis artikla
Version:
Filter, self-relieving pressure regulator, lubricator (model series 0 with micro mist lubricator)

Materials:
Body: die-cast zinc Z410 (model series 4 & 5: aluminium), spring hood: POM, diaphragms and seals: NBR, container: polycarbonate

Temperature range:
-10 do +60 °C

Pressure gauge connection:
G 1/4" (model series 0: G 1/8")

Pore width in the filter:
5 µm (model series 5: 40 µm)

Condensate draining:
semi-automatic****

Media:
Compressed air, neutral gases

Advantages:
•Automatic venting in the event of overpressure on the secondary side,
•Easy assembly of individual components using coupling kits within a model series and thread size,
•Hand wheel can be locked by pressing down on it


Input pressure:
1,5 - 16 bar

Max. condensate amount:
25 cm³

Switch panel thread:
M 30x1,5

Oil metering at 1000 l/min:
approx. 1 - 2 drops/min

Oil supply:
50 cm³

Lubricator reaction limit (at 6 bar):
60 l/min

Flow:
60 do 1200 l/min *****

Scope of delivery:
Air unit, including 50 mm pressure gauge

ATEX:
Operating material without its own potential source of ignition in accordance with Directive 2014/34/EU (not E-11 closure or electrical level monitoring)

Optional:
can be locked using a cylinder lock -K, can be locked using a cylinder lock with E 11 closure*** -KE11, version with protective cage -S, version with metal bowl** and inspection tube -M, automatic discharge -AM, automatic discharge closed when not pressurised (0 - 16 bar)-AMNC, electrical level monitoring -N

Advantages:
•can be filled with oil while under pressure
Lastnosti
Iz­ved­ba Vzdr­že­val­na enota
Navoj G 3/8"
Ob­mo­čje re­gu­li­ra­nja tlaka 0,5 - 10
Iz­ved­ba zbi­ral­ni­ka Ko­vin­ska po­so­da s pro­zor­no cevjo
Iz­pust kon­den­za­ta pol­av­to­mat­ski
Ma­no­me­ter pri­kaz 0 - 16
Pri­tr­dil­ni no­si­lec W 1
Pri­tr­dil­ni kot z ma­ti­co sti­kal­ne plo­šče MW 1
Sklo­pni paket KP 1
Vho­dni tlak 1,5 - 16
Dodatne informacije o CL383M
Teža 1,5 kg / Kos
Številka carinskega blaga 84811005
Skladno z RoHS Da
Dokumenti
*Standard series, please prefer for use, since the pressure control range is universally usable, **Drip cap made of a metal/glass combination,***Volkswagen closure (is supplied without a spanner),****As soon as the input pressure drops below the min. input pressure, the drain valve opens automatically. By screwing the drain screw tight, the semi-automatic opening of the drain valve can be prevented, *****measured at P1 = 10 bar P2 = 6.3bar and 1 bar pressure drop

 
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Takoj dobavljivo