Kos
Opis artikla
Materials:
Body: die-cast zinc Z410 (model series 4 & 5: aluminium), seals: NBR, condensate container: die-cast zinc (model series 5: aluminium) or polycarbonate

Temperature range:
-10 do +60 °C

Media:
Compressed air, neutral gases

ATEX:
Operating material without its own potential source of ignition in accordance with Directive 2014/34/EU (not model series 4)

Advantages:
•Easy assembly of individual components using coupling kits within a model series and thread size.

Note about semi-automatic condensate drain:
As soon as the input pressure drops below the min. input pressure, the drain valve opens automatically. By screwing the drain screw tight, the semi-automatic opening of the drain valve can be prevented.

Application:
Microfilters are used where high requirements are required for the purity of the compressed air requirements. Finest particle (> 0,01 µm) and oil mist is separated here. We recommend the upstream connection of a prefilter to increase the service life.

Dust removal:
> 0,01 µm (99,999 %)

Residual oil content:
0.01 mg/m³ (Class 1 according to DIN ISO 8573-1)

Input pressure:
1.5 - 16 bar, with metal tank max. 20 bar** (series 0: when using coupling packet max. 12 bar)

Optional:
Model series 0 (only type FX 018), 1 and 2: Protective cage -S, model series 2 and 4: Metal bowl with inspection tube -M, model series 1, 2 and 4: automatic drain -AM, automatic discharge closed when not pressurised (0 to 16 bar) -AMNC
Lastnosti
Iz­ved­ba Fini fil­ter (pod-​mikrofilter)
Se­ri­ja Mul­ti­fix 2
Navoj G 1/2"
op­ti­mal­ni pre­tok* 720
Iz­ved­ba zbi­ral­ni­ka Pla­stič­na po­so­da
Iz­pust kon­den­za­ta pol­av­to­mat­ski
Maks. ko­li­či­na kon­den­za­ta 25
H 185
H1 152
L 69
Pri­tr­dil­ni no­si­lec W 2
Sklo­pni paket KP 2
Na­do­me­stni fil­ter X 38/60
Opre­ma in­di­ka­tor di­fe­renč­ne­ga tlaka 0 - 0,35 bara (po­se­bej ce­nov­no ugo­dno) DDA B
Opre­ma ma­no­me­ter di­fe­renč­ne­ga tlaka 0 - 0,5 bara DDA M
Vho­dni tlak 1,5 - 16
Dodatne informacije o FX12
Teža 750 g / Kos
Številka carinskega blaga 84213925
Skladno z RoHS Da
Dokumenti
*at inlet pressure 6 bar and 0.1 bar pressure loss, **Metal tank with automatic draining AM/AMNC: max. 16 bar

 
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Takoj dobavljivo