360-degree view: IQST 1212 ES LE - T push in fitting R 1/2"-12mm, IQS-ES LE/IQS-PVDF
Zgleden uprizoritev: TE push-in fitting with cylindrical thread, stainless steel
360-degree view: IQST 1212 ES LE - T push in fitting R 1/2"-12mm, IQS-ES LE/IQS-PVDF
Količina
Kos
Takoj dobavljivo iz skladišča. Naročite do 16:30 ure in naročilo bomo odpremili še danes.
Opis artikla
Materials: Type stainless steel: Body and release ring: 1.4401, seals FKM, green (FDA 21 CFR 177.2600), Holding claws: Stainless steel 1.4310, Lubricant: Silicone grease (NSF / ANSI 51 & 61) Type PVDF: body and release ring: PVDF, threaded part: Stainless steel 1.4401, gaskets: FKM, green (FDA 21 CFR 177.2600), retaining claws: Stainless steel 1.4310, lubricant: Silicone grease (NSF / ANSI 51 & 61)
Temperature range: Type stainless steel: -20 °C to +200 °C (Ø 16: -15°C to +190°C) Type PVDF: -20 °C to +120 °C
Operating pressure: Type stainless steel: -0.95 to 20 bar Type PVDF: Ø 4 - 6 mm: -0.95 to 20 bar (+20 °C), -0.95 to 10 bar (+100 °C), -0.95 to 3 bar (+120 °C), Ø 8 mm: -0.95 to 20 bar (+20 °C), -0.95 to 8 bar (+100 °C), -0.95 to 3 bar (+120 °C), Ø 10 - 12 mm: -0.95 to 12 bar (+20 °C), -0.95 to 6 bar (+100 °C), -0.95 to 3 bar (+120 °C)
Media: oiled and unoiled compressed air, non-hazardous gasses and liquids
Advantages: •Available with conical thread or with cylindrical thread with chambered O-ring, •Gaskets and lubricants with approval according to FDA or NSF/ANSI, •type PVDF: lighter and cheaper than push-in fittings made of stainless steel with simultaneous high chemical resistance, •type PVDF: transparent body allows visibility of the medium inside the connector
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.