Skupina artiklov

L-vticna privijacenja, cilindricni navoj, ES LE / PVDF

Materials:

Type stainless steel: Body and release ring: 1.4401, seals FKM, green (FDA 21 CFR 177.2600), Holding claws: Stainless steel 1.4310, Lubricant: Silicone grease (NSF / ANSI 51 & 61)

Type PVDF: body and release ring: PVDF, threaded part: Stainless steel 1.4401, gaskets: FKM, green (FDA 21 CFR 177.2600), retaining claws: Stainless steel 1.4310, lubricant: Silicone grease (NSF / ANSI 51 & 61)

Temperature range:

Type stainless steel: -20 °C to +200 °C (Ø 16: -15°C to +190°C)

Type PVDF: -20 °C to +120 °C

Operating pressure:

Type stainless steel: -0.95 to 20 bar

Type PVDF: Ø 4 - 6 mm: -0.95 to 20 bar (+20 °C), -0.95 to 10 bar (+100 °C), -0.95 to 3 bar (+120 °C), Ø 8 mm: -0.95 to 20 bar (+20 °C), -0.95 to 8 bar (+100 °C), -0.95 to 3 bar (+120 °C), Ø 10 - 12 mm: -0.95 to 12 bar (+20 °C), -0.95 to 6 bar (+100 °C), -0.95 to 3 bar (+120 °C)

Media:

oiled and unoiled compressed air, non-hazardous gasses and liquids

Advantages:

•Available with conical thread or with cylindrical thread with chambered O-ring,
•Gaskets and lubricants with approval according to FDA or NSF/ANSI,
type PVDF: lighter and cheaper than push-in fittings made of stainless steel with simultaneous high chemical resistance,
type PVDF: transparent body allows visibility of the medium inside the connector

Dokumenti:

Več informacij Manj podatkov

Filtriraj artikle

Material
Prosimo, izberite
G
Prosimo, izberite
D
Prosimo, izberite
L-vticna privijacenja, cilindricni navoj, ES LE / PVDF:
4 od 24 izdelkov
Takoj dobavljivo
Takoj dobavljivo
Takoj dobavljivo
Takoj dobavljivo
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.