Reducirni vložki za medeninaste navojne prikljucke
{{ bild.Beschreibung }}
{{ bildGross.Beschreibung }}
{{ bildGross.Beschreibung }}
{{ bildGross.Beschreibung }}
Temperature range:
-60°C up to max. +300°C (with seal: -20°C up to max. +80°C)
Recommended raw materials:
Copper, polyamide (with reinforced sleeve)
Note:
The brass compression ring screw connections cannot be combined with the cutting ring pipe screw connectors ISO 8434-1 (DIN 2353). When using soft copper tube a correction factor of 0.65 must be used (pressure x 0.65). When using polyamide tube the operating pressure of the tube applies.
Materials:
brass
Application:
With the use of reducing inserts you can use fittings with different hose diameters, e.g. a straight fitting with 10 mm Ø type KG 10 MS can be screwed together with 10 mm hose on the one hand. On the other hand, you can mount a 6 mm hose when using a reducing insert type KRED 106 MS. Thus, you have achieved a reduction from 10 to 6 mm. The reducing inserts can be used for all brass compression fittings. They consist of individual segments that separate from each other during assembly by means of predetermined breaking points.