shock absorber body and accessory: Steel bronzing, piston rod: hardened, rust-free steel
Temperature range:
-10 do +66 °C
Stroke speed:
0,15 do 4 m/s
Fixed limit stop:
integrated
Information:
Exceeding W4 (max. energy consumed per hour expressed in Nm/h) is possible in the case of temporary switch-off, or when the shock absorber is cooled with the cylinder exhaust air (take note of the approved heating).
*at higher axial deviations use side load adapters (Type BV) ***The side load adapter can only be fitted on shock absorbers without an impact head, or if required, it must be dismantled.