Banjo bolt solenoid valve G 1/8"-6, 2/2-potni (NO), 24 V AC

Št. Izdelka:

MHO 260 24VAC

Kos
Opis artikla
Materials:
Banjo bolt and banjo: Nickel-plated brass, internal parts: Brass / stainless steel, seals: FKM/PA/PVC

Temperature range:
-20 do +50 °C

Media:
lubricated and unlubricated, filtered compressed air, neutral gases

Switching time:
< 12 ms

Control voltages:
Standard: 24 V DC, 230 V AC, upon request other voltages

Voltage tolerance:
± 10 %

Protection class:
IP 65

Structural shape solenoid coil:
U (plug size 1)

Operating recommendations:
Solenoid with "pressure input banjo bolt" are suitable for the assembly on a central compressed air supply, to control a consumer via the banjo. Solenoid valves with "pressure input banjo" can be screwed directly into a consumer (e.g. pneumatic cylinder) via the banjo and supplied with compressed air via the banjo. If a pneumatic cylinder should be controlled, then we recommend installing a NO valve (MHZO...) in one connection and an NC valve (MHZ...) in the other connection.

Advantages:
•economical price,
•compact design


Note:
We recommend ordering an SD 50 silencer separately for the 3/2-directional valves, which can be screwed into the anchor hole..

Information:
These valves are always supplied with a solenoid coil and a connector plug.
Lastnosti
Kr­mil­na na­pe­tost 24 V AC
Vho­dni tlak Votli vijak
Funk­ci­ja 2/2-​potni (NO)
Navoj vo­tle­ga vi­ja­ka G 1/8"
Obro­ček pre­mer mehke cevi (zunaj) 6
Obra­to­val­ni tlak 0 - 15
Po­ra­ba ener­gi­je (AC) 9
Na­do­me­stna ma­gne­tna tu­lja­va MAG U 24VAC
Dodatne informacije o MHO26024VAC
Številka carinskega blaga 84812090
Dokumenti

 
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Ni na zalogi