Kos
Opis artikla
Materials:
Body and sleeve: Nickel-plated brass, seals: NBR, holding claws: Stainless steel (only silicone-free seals and lubricants are used during assembly!)

Temperature range:
-20 do +80 °C

Operating pressure:
0,5 do 10 bar

Media:
oiled and unlubricated, filtered compressed air, neutral and non-hazardous gases

Function:
The check valve function can be used for a brief intermediate stop of an actuator. If there is a control signal on the actuating connection, the flow between the banjo and male threads is possible in both directions. If there is no control signal, the valve locks the flow from the male thread to the banjo (venting the actuator), thus causing it to stop briefly. The flow from the banjo to the male threads (towards the actuator) is unaffected by the control signal.
Lastnosti
Iz­ved­ba obro­ča­ste­ga kosa Vtič­ni pri­klju­ček
Iz­ved­ba brez ročnega upra­vlja­nja v sili
Navoj G1 G 1/4"
G2 (ak­ti­vi­ra­nje) G 1/8"
Obro­ček pre­mer mehke cevi (zunaj) D 6
Dodatne informacije o STOP146MSV
Teža 65 g / Kos
Številka carinskega blaga 84818099
Skladno z RoHS Da
Dokumenti

 
Vse navedbe podatkov so nezavezujoče orientacijske vrednosti! Za izbiro podatkov, za katere ne izdamo pisnega potrdila, ne prevzemamo jamstev. Navedbe tlaka, v kolikor ni navedeno drugače, se nanašajo na tekočine skupine II. pri +20°C.
Takoj dobavljivo